Residential · Drains and sewer lines
Hydro jetting of drain lines across Oakville
Think of a cable as a corkscrew and a jetter as a pressure washer that crawls.
- Typical stay: two to four hours
- On the dolly: jetter, assorted nozzles, camera, hose reel
- Your part: a route from the cleanout to a door for hoses
- Best against: fat, scale, sludge and fine roots
- Licensed plumbers · ask for details on the call
- Cause found and explained before work starts
- Oakville & Halton coverage
What this job involves
Think of a cable as a corkscrew and a jetter as a pressure washer that crawls. Water forced through a nozzle with rearward-facing ports drags the hose along the pipe while scouring the walls, sending grease, sludge, scale and root fuzz down to the sewer. For kitchen arms with years of fat on them, or laterals that keep snagging debris, jetting tends to buy a good deal more time than a cable ever does.
How the job goes
- Scope the line beforehand to be sure it can take the pressure.
- Pick the nozzle: penetrator for blockages, spinner for scouring, root head where needed.
- Enter at a cleanout and work the hose forward and back in overlapping passes.
- Watch what comes back: fat chunks, scale flakes, root fibre.
- Scope again so you can see the cleaned walls for yourself.
Warning signs on your pipes
- One kitchen line plugs several times a year.
- Cabling opens the drain, then it slows again within weeks.
- Earlier footage showed thick grease or scale coating the bore.
- The household cooks in volume, most days.
- Fine roots keep returning in a lined or PVC lateral.
From the job notes
Jetting is not for every pipe. Badly cracked clay or rotted cast iron can be harmed by pressure, which is why the camera always goes first.
Jetting is not for every pipe. Badly cracked clay or rotted cast iron can be harmed by pressure, which is why the camera always goes first. Where the pipe is sound, though, the jet restores close to full diameter and leaves a smooth wall that resists build-up.
Oakville homes from the fifties and sixties, like those around Maple Grove and the Coronation Park streets, often keep their original cast-iron drains indoors. Iron grows a rough interior crust called tuberculation, and a descaling nozzle can bring those lines back to honest flow without opening a single wall.
What comes off the truck
| Tool or part | What it does on the job |
|---|---|
| Jetter | Scours grease and scale off the walls instead of poking a hole through them |
| Drum machine, 3/8" cable | Kitchen and laundry branches out to the stack, with a bulb or blade head |
Questions we hear
Could jetting flood the basement?
No. The water heads down the opened line toward the sewer, and we work from a cleanout with the line already clear.
Is it safe on plastic drains?
Yes, at sensible pressure with the right nozzle. PVC and ABS take jetting well.
Related plumbing
- Sewer camera inspectionvideo of the line, start to finish
- Sump pump installationnew pit or new pump
- Gas tank water heater replacementold tank out, new tank in
- Tank or tankless?when replacing a heater
- What not to flushevery day
- Clearview1960s to 1980s homes near Ford Drive
- Maple Grove1950s and 1960s ranch homes
- West Oak Trails1990s and 2000s subdivision
Not sure which job fits your pipe? Call (365) 517-8536 and describe it.